Centrifugal separators separate condensation from compressed air. A so-called cyclone system imparts a rotary motion to the compressed air inlet. By means of the centrifugal force generated, the liquid and solid particles thrown against the wall of the separator are transformed into drops, and then they flow into the collecting tank of the condensation.

The compressed air output is devoid of liquid condensation, while it is worth mentioning that the water in gaseous form is still about 100%.

Centrifugal separators should be mounted in such a way that the incoming air is as cold as possible: the colder the compressed air is, the greater will be the condensation that can be separated.

 

Kaeser separator With the separators of the series AQUAMAT the user is able to deal with the condensations produced by the compressed air in a simple and autonomous way and wasting only a minimal amount. In fact, comparing the disposal of the condensation operated by a specialized company, the system Acquamat allows a saving of work of about 90% so that the Acquamat separators can be amortized within a few months.
MTA separator To separate the condensation, separators of the MS series use a centrifugal element which guarantees a very high separation efficiency, close to 100% in nominal conditions and always above 98% and low load losses. They are completely made ​​of carbon steel and on request can also be supplied in stainless steel. Designed and tested according to the most important regulations on pressure vessels they are available in a range of 10 models with capacities from 252 m³ / h up to 38400 m³ / h of compressed air sucked by the compressor. Maximum working pressure up to 40 bar.
HIROSS separator The Hypersep are the result of 35 years of experience in the market, are characterized by advanced design, a careful sizing and they ensure the highest levels of performance. With no moving parts the Hypersep HIROSS is extremely reliable, it does not require maintenance and its operation is at no cost, since it does not require external energy. It is offered in various sizes, models with threaded aluminum and carbon steel flanges.